Characteristics and consumption

PETROCOOL SE-B-302 product is considered a new generation of formulation, whose active ingredients are spread in the form of microemulsion when mixed with water and has the following special advantages:

• Excellent mixing speed with water
• Excellent cooling effect
• Very good lubrication effect
• Excellent stability for a wide range of hard waters
• High protection against corrosion of parts, tools and device body
• Excellent chipping and removal of chips from the machining area
• Proper visibility of parts and tools during operation
• Long life

PETROCOOL SE-B-302 product is stable in water with hardness between 80 ppm and 600 ppm. Also, due to the use of a formulation with anti-foam properties, it can be used with water with low hardness and without the need to add anti-foam. This product can be used in light and medium machining operations, taking into account the type of operation, the type of part and tool, and the water hardness with different percentages from 5% to 12%.

• In case of skin or eye contact, wash the area immediately with water.
• After the end of the usage period, avoid discharging the metalworking fluid emulsion into the environment.
• If swallowed, seek medical attention immediately.

Storage

• Store in a closed place at a temperature above 10 and below 40ᵒC.
• It will last up to six months in the original packaging.
• Close the container properly after use to prevent evaporation or contamination of the product.